Transair offers stainless steel pipes, quick connect fittings, valves and accessories which are suitable for fluid piping on industrial buildings. Transair’s pipework systems for fluids are available from 1/2″ to 4″.
Stainless Steel Pipe Sizing
The innovative technology of Transair enables rapid and easy assembly: quick connection of components to the alluminum pipe. This technology takes into account the specific requirements of each diameter and provides the user with an optimum safety coefficient and easy connection. Transair provides a fast, easy, clean and reliable means for installing ½” to 4 ” stainless piping systems.
Determining your pipe sizeInnovative technology at the heart of Transair enables rapid and easy assembly: quick connection of components to the stainless steel pipe. This technology takes into account the specific requirements of each diameter and provides the user with an optimum safety coefficient and easy connection.
|> Ø 1/2″ > Ø 3/4″||Instant Connection by gripping ring
Pipe-to-pipe and threaded connectors in Ø 1/2″ and 3/4″ can be immediately connected to the Transair pipe – simply push the pipe into the connector up to the connection mark. The gripping ring of each fitting is then automatically secured and the connection is safe.
|> Ø 1 1/2″ > Ø 2″||Double-clamp quick-fit connection
Pipe-to-pipe and threaded connectors in Ø 1 1/2″ and 2″ can be quickly connected to Transair Quick Connect pipe by utilizing a double clamp ring. This secures the connection between the nut and the pipe – tightening of the nuts secures the final assembly.
> Ø 3″
> Ø 4″
|Clamp quick-fit connection
Pipe-to-pipe and male connectors in Ø 3″ and Ø 4″ can quickly be connected to the Transair quick connect pipe. Position the pipes to be connected withing the Transair cartridge and close/tighten the Transair clamp.
Pipe Sizing Chart
Select the Transair diameter for your application based on required flow against pressure drop. Estimated values for: a closed loop network, a pressure of 115 psi with 5% pressure drop.
- Main network length (ring main): 984 ft
- Compressor power: 40 hp
- Required flow rate: 140 cfm
*The most suitable Transair diameter is Ø 1½”
To size your pipework system you can also use Transair’s Flow Calculator
Stainless Steel Technical Specifications
All the components of the Transair stainless steel pipe system conforms to the following specifications:
Suitable Fluids: Industrial water with additives (glycol or inhibitors to present against the formation of algae or fungus). List available upon request.
Connector Technology: Reversible and reusable rapid mechanical connection.
Working Temperature: -4°F to +140°F
Maximum Service Pressure: 145 PSI